0250 2519494
+91 7756979879
official@ptespl.com

COD/BOD/TSS

OPSA-150

DESCRIPTION:

The OPSA-150 is a new organic pollutant monitor that uses HORIBA's proprietary Rotary Cell Length Modulation, a measuring technique incorporating 25 years of expertise. The unit can be used as an organic pollutant monitor at drainage systems for determining compliance with COD/BOD monitoring regulation, for monitoring quality of water measuring levels of organic matter at water supply intakes, ands as an organic monitor on process lines (phenol meter).

FEATURES:

Sensor that makes full use of Rotary Cell Length Modulation (Patented)
Zero drift correction is performed in every cycle of measurement. This correction can eliminate the effect of any interference on cells.
Cell length modulation provides readings from multiple measurements, making available results from various cell lengths. This allows the single device to make measurements on a large range of concentrations from as low as 0 to 0.1 Abs, up to 0 to 5.0 Abs.

TYPE OF INSTALLATION:
  • Extraction
  • IN SITU
  • For e-brochure click here


    AVAILABLE MODELS


    MODEL NAME: OPM300-OPM200
    Measurement MethodsUV + VIS Spectrophotometer (Dual Beam AbsorptionSpectrophotometry)
    200-350nm for Ultraviolet spectrum scanning
    320-750nm for Visible spectrum scanning*
    Measurement itemsCOD, BODc, TSS, TOCc
    Measurement RangeCOD (0-300 mg/l), BODc (0-300 mg/l), TSS (0-300 mg/l), TOCc (0-100mg/l)
    Measurement AccuracyOPM300 Within ± 5% of full scale, OPM200 Within ± 7% of full scale
    Measurement RepeatOPM300 - OPM200 Within ± 5% of full scale
    Measurement LinearityOPM300 - OPM200 Within ± 5% of full scale
    Measurement StabilityOPM300 - OPM200 Within ± 2% of full scale
    Measurement IntervalT90 in One Second, Data output within 1 minute
    Resolution0.01mg/L
    CalibrationMulti point based automatic calibration. Standard calibration as per factory setting. Local calibration for adaptive environments. For COD compensation with respect to organics and inorganic proportions.
    Cable length10 m standard (Expandable up to 30m)
    Sample minimum pressure1 Bar
    Power230VAC±10%, 50Hz
    OutputRS485 Smart Two way Communication Enabled
    Protection classIP68
    Cleaning MethodAdvanced Surface conductive cleaning
    MOCOPM300 Titanium Quartz POM SS316L,
    OPM200 Quartz POM SS316L
    Sensor DiagnosticsOnboard library for diagnostic commands available
    DisplayAnti-glare LCD Display – Touch Panel Type
    Ambient operating ConditionAmbient Temperature 0-55 ̊C, Ambient Humidity 90% RH
    Storage temperature5~45°C
    Background Data InputSample loss input, Time correction input, Flux Cancellation Input, Temperature Compensation Input
    ConstructionFor Outdoor Installation
    Color/FinishStandard material finish as per MOC
    Installation Conditions*Installation guide book to be referred

    For e-brochure click here




    MODEL NAME: OPM250
    Measurement MethodsUV + VIS Spectrophotometer (Dual Beam AbsorptionSpectrophotometry)
    180-350nm for Ultraviolet spectrum scanning
    320-750nm for Visible spectrum scanning*
    Measurement itemsCOD, BODc, TSS, TOCc
    Measurement RangeCOD (0-500-3500 mg/l), BODc (0-500-3500 mg/l), TSS (0-500-3500 mg/l), TOCc (0-500-2000 mg/l)
    Measurement AccuracyWithin ± 8% of full scale
    Measurement Repeat - AbilityWithin ± 8% of full scale
    Measurement LinearityWithin ± 8% of full scale
    Measurement StabilityWithin ± 5% of full scale
    Measurement IntervalT90 Data output within 1 minute
    Resolution0.01mg/L
    CalibrationMulti point based automatic calibration. Standard calibration as per factory setting. Local calibration for adaptive environments. For COD compensation with respect to organics and inorganic proportions.
    Cable length10 m standard (Expandable up to 30m)
    Sample minimum pressure1 Bar
    Power230VAC±10%, 50Hz
    OutputRS485 Smart Two way Communication Enabled
    Photo incident SourceUV + Vis entire spectral Light incidence
    Protection classIngress Protection IP68, EMC Conformity with EN61323-1, EN61010-1
    Cleaning MethodAdvanced Surface conductive cleaning / Compressed Air Cleaning
    MOCTitanium Quartz POM SS316L
    Sensor DiagnosticsOnboard library for diagnostic commands available
    DisplayAnti-glare LCD Display – Touch Panel Type
    Ambient operating ConditionAmbient Temperature 0-55 ̊C, Ambient Humidity 90% RH
    Storage temperature5~45°C
    Background Data InputSample loss input, Time correction input, Flux Cancellation Input, Temperature Compensation Input
    ConstructionFor Outdoor Installation
    Color/FinishStandard Integral material finish as per MOC
    Installation Conditions*Installation guide book to be referred

    For e-brochure click here




    MODEL NAME: OPM3000
    Measurement MethodsUV + VIS Spectrophotometer (Dual Beam AbsorptionSpectrophotometry)
    180-350nm for Ultraviolet spectrum scanning
    320-750nm for Visible spectrum scanning*
    Measurement itemsCOD, BODc, TSS, TOCc
    Measurement RangeCOD (0-10000-30000 mg/l), BODc (0-10000-30000 mg/l), TSS (0-10000-30000 mg/l), TOCc (0-5000-10000 mg/l)
    Measurement AccuracyWithin ± 2% of full scale
    Measurement Repeat - AbilityWithin ± 5% of full scale
    Measurement LinearityWithin ± 5% of full scale
    Measurement StabilityWithin ± 2% of full scale
    Measurement IntervalT90 Data output within 1 minute
    Resolution0.01mg/L
    CalibrationMulti point based automatic calibration. Standard calibration as per factory setting. Local calibration for adaptive environments. For COD compensation with respect to organics and inorganic proportions.
    Cable length10 m standard (Expandable up to 30m)
    Sample minimum pressure1 Bar
    Power230VAC±10%, 50Hz
    OutputRS485 Smart Two way Communication Enabled
    Photo incident SourceUV + Vis entire spectral Light incidence
    Protection classIngress Protection IP68, EMC Conformity with EN61323-1, EN61010-1
    Cleaning MethodAdvanced Surface conductive cleaning / Compressed Air Cleaning
    MOCTitanium Quartz POM SS316L
    Sensor DiagnosticsOnboard library for diagnostic commands available
    DisplayAnti-glare LCD Display – Touch Panel Type
    Ambient operating ConditionAmbient Temperature 0-55 ̊C, Ambient Humidity 90% RH
    Storage temperature5~45°C
    Background Data InputSample loss input, Time correction input, Flux Cancellation Input, Temperature Compensation Input
    ConstructionFor Outdoor Installation
    Color/FinishStandard Integral material finish as per MOC
    Installation Conditions*Installation guide book to be referred

    For e-brochure click here