The OPSA-150 is a new organic pollutant monitor that uses HORIBA's proprietary Rotary Cell Length Modulation, a measuring technique incorporating 25 years of expertise. The unit can be used as an organic pollutant monitor at drainage systems for determining compliance with COD/BOD monitoring regulation, for monitoring quality of water measuring levels of organic matter at water supply intakes, ands as an organic monitor on process lines (phenol meter).
Sensor that makes full use of Rotary Cell Length Modulation (Patented)
Zero drift correction is performed in every cycle of measurement. This correction can eliminate the effect of any interference on cells.
Cell length modulation provides readings from multiple measurements, making available results from various cell lengths. This allows the single device to make measurements on a large range of concentrations from as low as 0 to 0.1 Abs, up to 0 to 5.0 Abs.
MODEL NAME: | OPM300 |
Measurement Methods | UV+Vis Full spectrum DOAS |
Measurement Range | 0-50-300 mg/l |
Measurement Accuracy | + 5% FS |
Measurement Repeat | Ability + 5% FS |
Measurement Interval | 120 readings in 60 Seconds T90 |
Resolution | 0.01mg/L |
Calibration | Zero & Span reference point automatic calibration Onsite or Remote based |
Output | RS485 Smart Two way Communication AUTOMATICA Enabled |
Cleaning Method | Advanced Surface conductive friction cleaning |
Sensor Diagnostics | Onboard library for diagnostic commands available |
MODEL NAME: | OPM600 |
Measurement Methods | UV+Vis Full spectrum DOAS |
Measurement Range | 0-300-600 mg/l |
Measurement Accuracy | + 2% FS |
Measurement Repeat | Ability + 2% FS |
Measurement Interval | Each reading in 60 Seconds T90 |
Resolution | 0.01mg/L |
Calibration | Zero & Span reference point automatic calibration Onsite or Remote based |
Output | RS485 Smart Two way Communication AUTOMATICA Enabled |
Cleaning Method | Advanced Surface conductive friction cleaning or Compressed Air cleaning |
Sensor Diagnostics | Onboard library for diagnostic commands available |
MODEL NAME: | OPM800 |
Measurement Methods | UV+Vis Full spectrum DOAS |
Measurement Range | 0-500-1000 mg/l |
Measurement Accuracy | Accuracy + 2% FS |
Measurement Repeat | Ability + 2% FS |
Measurement Interval | Each reading in 60 Seconds T90 |
Resolution | 0.01mg/L |
Calibration | Zero & Span reference point automatic calibration Onsite or Remote based |
Output | RS485 Smart Two way Communication AUTOMATICA Enabled |
Cleaning Method | Compressed Air cleaning |
Sensor Diagnostics | Onboard library for diagnostic commands available |